Gas Liquefaction Plant 3600 Nm3/h
YPO-3600 Liquefaction Oxygen Equipment , LOX
Specifications:
The followings are the standard products for the Liquefaction Oxygen Equipment YPO series which are manufactured by our company. Regarding other particular product can be calculated and designed according to the actual requirements.
| MODEL CONTENTS | YPO-2000 | YPO-2500 | YPO-4500 | YPO-5000 | YPO-10000 |
| LOX flow | Nm3/h | 2000 | 2500 | 4500 | 5000 | 10000 |
| LOX purity | ppm | Same as the feed air | Same as the feed air | Same as the feed air | Same as the feed air | Same as the feed air |
| LOX pressure | MPa | ～0.2 | ～0.3 | ～0.2 | ～0.2 | ～0.2 |
| Subcooled | K | 3 | 3 | 3 | 3 | 3 |
Typical Product: 3600 Nm3/h YPO-3600 Liquefaction Oxygen Equipment
Output, purity and pressure
| Product | Flow (Nm3/h) | Purity | Pressure MPa(G) | Subcooled (K) |
| LOX | 3600 (g) | Same as the feed air | 0.2 | 3 |
1. Nm3/h is defined as the volume at 0℃, 101.3kPa(A) (same as below);
2. The liquid output is calculated from data of gas, and the pressure is calculated with 0 meter high at outlet of cold box.
3. All pressures which are not specially defined below are the gauge pressures.
Description:
The supplement nitrogen gas from air separation plant mixed with the reflux gas of liquefaction plant is compressed through the gas transmission nitrogen turbo-compressor, then it joins another stream of reflux gas to be compressed through the nitrogen turbo-compressor section and to be divided into two streams. One enters main heat exchanger to be cooled and drawn into high temperature expander, it is re-warmed through main heat exchanger and fed out of cold box after it is expanded, then it returns inlet of circulation section of nitrogen turbo-compressor; another stream enters main heat exchanger for cooling after it is supercharged through the supercharge ends of high-temperature expander and low-temperature expander, part of the cooled stream is drawn into low-temperature expander to be expanded, re-warmed through main heat exchanger and fed out of cold box back to inlet of circulation section of nitrogen turbo-compressor; the rest will be liquefied to be liquid nitrogen directly. The gaseous oxygen is liquefied by the liquid nitrogen in the oxygen liquefaction heat exchanger, and then it is sent to user.
Applications:
- Chemicals
- Automotive and transportation equipment
- Aerospace
- Source of energy
- Glassmaking
- Water and wastewater treatment
Competitive Advantage:
1. Our company’s economic effectiveness is in the lead of the industry in China
2. Our company is the biggest air separation plant design and manufacture base
3. Our company is one of the state 21 great equipment domestication bases
4.Very simple and safe to operate
5. Low power consumption
6. Low Working Pressure
7. Low Operating Cost
8. Low Maintenance Cost
